Hyundai Tucson: Smart Key System / Specifications

Hyundai Tucson (LM) 2010-2015 Service Manual / Body Electrical System / Smart Key System / Specifications

Specifications

Smart Key Unit

Items	Specification
Rated voltage	DC 12V
Operating voltage	DC 9 ~ 16V
Operating temperature	-22°F ~ 167°F (-30°C ~ 75°C)
Load	Max. 5mA (When welcome light function off)

RF Receiver

Items	Specification
Frequency	433 Mhz
Antenna type	FSK (Frequency Shift Keying)

Smart Key Fob

Items

Specification

Battery

Lithium battery 3V 1EA

Distance

30m from vehicle, RF : 30m, Passive(LF) : 0.7m

Battery life

More than 2 years (20 times / a day)

An inappropriately disposed battery can be harmful to the environment and human health.

Dispose the battery according to your local law(s) or regulation.

Push buttons

4 (Door lock / unlock, Liftgate, Panic)

Frequency(Rx)

125 kHz

Frequency(Tx)

433 MHz

Numbers

2EA

Antenna

Items	Specification
Rated voltage	DC 12V
Operating voltage	DC 9 ~ 16V
Operating temperature	-22°F ~ 167°F (-30°C ~ 75°C)
Frequency	125kHz
Numbers	Interior(3EA), Door(2EA), Bumper(1EA)

Smart Key System

...

Components and Components Location

Component Location (1) 1. Buzzer2. RF receiver3. Smart key unit4. Interior antenna 15. Interior antenna 26. Interior antenna 37. Bumper antenna Component Location (2) 1. Door outside handle ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Windshield Wiper-Washer Switch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds (A) after removing 3 screws. Take care not to damage and scratch the shrouds and its related parts. Take care not to damage the hook when removing the upper ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
Fuel Pressure Test (Low pressure system) 1. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line") When removing the fuel pump relay, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS ...