Hyundai Tucson: General Information / Specifications
| Specifications |
| Tightening Torques |
| Items | N.m | Kgf.m | lb-ft |
| Transfer assembly mounting bolts | 60.8~65.7 | 6.2~6.7 | 44.8~48.5 |
| 4WD ECM mounting nuts | 9.8~11.8 | 1.0~1.2 | 7.2~8.7 |
| Coupling assembly mounting bolts | 56.9~64.7 | 5.8~6.6 | 42.0~47.7 |
| Propeller shaft mounting bolts | 49.0~68.6 | 5.0~7.0 | 36.2~50.6 |
| Transfer oil drain plug | 39.2~58.8 | 4.0~6.0 | 28.9~43.4 |
| Transfer oil filler plug | 39.2~58.8 | 4.0~6.0 | 28.9~43.4 |
| Lubricants |
| Items | Specification | Capacity |
| Transfer oil | Hypoid gear oil API GL-5, SAE 75W/90 (SHELL SPIRAX X or equivalent) | 0.6 L (0.16 U.S.gal., 0.63 U.S.qt, 0.53 Imp.qt.) |
| Transfer spline | TECHLUBE MEGAMAX - ALPHA OR EQUIVALENT | As required |
| Coupling oil | SHELL TF0870 | 0.485 L (0.13 U.S.gal.,0.51U.S.qt,0.43Imp.qt.) |
Special Service Tools
Special Service Tools
Tools(Number and name)IllustrationUse09431-45100Oil seal installerInstallation of transfer case oil seal.(Right side)09473-3B100Oil seal installerInstallation of transfer ca ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 2 and 5 [B1/S1].
4.
Measure resistance between the HO2S terminals 3 and 4 [B1/S2].
5.
Check that the resistance is within the specification.
Specifica ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Multimedia Jack Repair procedures
Removal
1.
Remove the floor console upper cover (A) using the appropriate tool.
2.
Remove the seat heater switch module (A).
Take care not to damage the hook when removing the switch.
3.
Disconnect the connectors (A) from the seat heater switch module.
4.
Rem ...