Hyundai Tucson: Automatic Transaxle Control System / SS-B Solenoid Valve(ON/OFF) Description and Operation

Description
SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed at valve body.

SS-A Solenoid Valve(ON/OFF) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

SS-B Solenoid Valve(ON/OFF) Specifications
Specifications ON/OFF Solenoid Valve(SS-A, SS-B) x Control type : Normal low type Control pressure kpa (kgf/cmx, psi)490.33(5.0, 71.12) Internal resistance(x)10 ~ 11 ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Inhibitor Switch Description and Operation
Description Inhibiter Switch contains two contact points. One of these points connects the engine startup when the lever is in the N or P position and turns on the reverse lights. The other contact point monitors the lever's position (PRND) and is used to control gear setting signals. ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Selecting a Child Restraint System (CRS)
When selecting a CRS for your child, always: Make sure the CRS has a label certifying that it meets applicable Federal Motor Vehicle Safety Standards (FMVSS 213). Select a child restraint based on your child’s height and weight. The required label or the instructions for use typically ...

© 2010-2024 www.htmanual.net