Hyundai Tucson: Keyless Entry And Burglar Alarm / Transmitter Specifications

Hyundai Tucson (LM) 2010-2015 Service Manual / Body Electrical System / Keyless Entry And Burglar Alarm / Transmitter Specifications

Specifications

Item	Specification
Rated voltage	DC 3V
Temperature range	-4°F ~ 140°F (-20°C ~ +60°C)
RF Modulation method	FSK
Keyless entry transmitterPower source	Lithium 3V battery (1EA)
Transmissible distance	30m or more
Life of battery	2 years or more (at 20 times per day)
Button	3 (Door lock, Door unlock, Liftgate)
Transmission frequency	313.85 MHz

Repair procedures

Inspection Front Door Lock Actuator 1. Remove the front door trim. (Refer to the BD group - "Front door") 2. Remove the front door module. (Refer to the BD group - "Front door") 3. Disc ...

Transmitter Repair procedures

Inspection 1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter. 2. Remove the battery and check voltage if the red light doesn't flicker. ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
Compression Pressure Inspection If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. 1. Warm up and stop engine. Allow the engine to warm up to normal operating temperature. 2. Disconnect the injector exten ...

Hyundai Tucson (LM) 2010-2015 Service Manual: License Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp lens (B) by pressing the clip (A). 3. Turn the license bulb socket (A) counterclockwise to remove the bulb (B) from lens (C). Installation 1. Install the bulb. 2. Install the license lamp lens. ...