| Troubleshooting |
| Trouble Symptom | Probable cause | Remedy |
| Vehicle pulls to one side | Scoring of driveshaft ball joint | Replace |
| Wear, rattle or scoring of wheel bearing | Replace | |
| Defective front suspension and steering | Adjustment or Replace | |
| Vibration | Wear, damage or bending of driveshaft | Replace |
| Driveshaft rattle and hub serration | Replace | |
| Wear, rattle or scratching of wheel bearing | Replace | |
| Shimmy | Defective wheel balance | Adjustment or Replace |
| Defective front suspension and steering | Adjustment or Replace | |
| Excessive noise | Wear, damage or bending of driveshaft | Replace |
| Rattle of driveshaft and worn hub splines | Replace | |
| Wear, rattle or scoring of wheel bearing | Replace | |
| Loose hub nut | Adjustment or Replace | |
| Defective front suspension and steering | Adjustment or Replace |
Special Service ToolsHyundai Tucson (LM) 2010-2015 Owners Manual: Tire rotation
To equalize tread wear, HYUNDAI recommends that the tires be rotated every 7,500
miles (12,000 km) or sooner if irregular wear develops. During rotation, check the
tires for correct balance.
When rotating tires, check for uneven wear and damage. Abnormal wear is usually
caused by incorrect ti ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Camshaft Repair procedures
Removal
Timing chain cover removal is not required for this procedure.
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
•
Mar ...