Hyundai Tucson: Warnings and indicators / Turn signal indicator

The left or right turn signal blinks when you signal a lane change or turn. If the arrow comes on but does not blink, blinks more rapidly than normal, or does not illuminate at all, a malfunction in the turn signal system is indicated. Your dealer should be consulted for repairs.

This indicator also blinks when the hazard warning flasher button is pressed.

Seat belt warning
As a reminder to the driver, the seat belt warning light will blink for approximately 6 seconds each time you turn the ignition switch ON, regardless of belt fastening. ...

Light on indicator
The indicator illuminates when the parking (position) lights or headlights are ON. ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve terminals 1 and 2. Specification: Refer to "Specification" Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Seat belt warning light
Seat belt warning light (for driver’s seat) The driver’s seat belt warning light and chime will come on according to the following table when the ignition switch is in the ON position. *1 : The Warning Pattern repeats 11 times with an interval of 24 seconds. If the driver's seat belt i ...

© 2010-2019 www.htmanual.net