Hyundai Tucson: Engine Control System / Variable Intake Solenoid (VIS) Valve Specifications

Specification
Item
Specification
Coil resistance (x)
30.0 ~ 35.0 [20°C(68°F)]

Variable Intake Solenoid (VIS) Valve Description and Operation
Description Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The EC ...

Variable Intake Solenoid (VIS) Valve Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: SS-B Solenoid Valve(ON/OFF) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the resistance is within the specification. Removal 1. Remove the air cleaner assembly and air d ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Fluid Repair procedures
Service Adjustment Procedure Oil level Check     A check of ATF level is not normally required during scheduled services. If an oil leak is found, perform the oil level check procedure after repairs are completed.     When checking the oil level, be ...

© 2010-2026 www.htmanual.net