| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the right air vent.
(Refer to the BD group - "Crash pad") |
| 3. |
Remove the windshield deicer switch (A).
[LHD]
[RHD]
|
| Installation |
| 1. |
Install the windshield deicer switch. |
| 2. |
Install the right air vent. |
| Inspection |
| 1. |
Using an ohmmeter, inspect the continuity between the terminals after removing the switch.
[LHD]
[RHD]
|
Windshield Deicer Repair proceduresHyundai Tucson (LM) 2010-2015 Service Manual: Relay Box (Passenger Compartment) Description and Operation
Description
SJB (Smart Junction Box)
1.
Specification
ItemRequirementRemarkRated voltageDC 12VxVoltage rangeDC 8 ~ 16VNormal operating in this rangeStorage temperature-40°C ~ +95°CxOperating temperature-30°C ~ +85°CxOperating humidity85%PCB, Damp proofing, Coating, etc.Dark currentMax. 2 ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Specification: Refer to "Specification"
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the manif ...