Hyundai Tucson: Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Specifications

Hyundai Tucson (LM) 2010-2015 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Specifications

Specifications

Direct control VFS[26/B]

x Control type : Normal low type

Control Pressure kpa (kgf/cmx, psi)	9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54)
Current value(mA)	50 ~ 850
Internal resistance(x)	5.1

26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation

Description 26 brake control solenoid valve(26/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26 brake. ...

26 Brake Control Solenoid Valve(26/B_VFS) Schematic Diagrams

Circuit Diagram ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Variable Intake Solenoid (VIS) Valve Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the resistance is within the specification. Removal Replacing an on/off soleno ...