Hyundai Tucson: Engine Control System / Accelerator Position Sensor (APS) Specifications
| Specification |
| Accelerator Position | Output Voltage (V) | |
| APS1 | APS2 | |
| C.T | 0.7 ~ 0.8 | 0.29 ~ 0.46 |
| W.O.T | 3.85 ~ 4.35 | 1.93 ~ 2.18 |
Accelerator Position Sensor (APS) Description and Operation
Description
Accelerator Position Sensor (APS) is installed on the
accelerator pedal module and detects the rotation angle of the
accelerator pedal. The APS is one of the most important sensors ...
Accelerator Position Sensor (APS) Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Description and Operation
Warning Lamp Activation
Warning Lamp Behavior after Ignition On
As soon as the operating voltage is applied to the SRSCM
ignition input, the SRSCM activates the warning lamp for a LED lamp
check.
The lamp shall turn on for 6 seconds during the initialization phase and be turned off afterw ...
Hyundai Tucson (LM) 2010-2015 Service Manual: 4WD ECU Schematic Diagrams
Circuit Diagram
4WD ECU Connector
PinFunction1CAN communication line (Low)2CAN communication line (High)3-4Pressure sensor signal(+)5-6Lock mode switch7Oil pressure motor B8Oil pressure motor A9-10-11Pressure sensor(Input)12Input sensor signal(-)13Battery power 14Ground15IG power16-17-1 ...