Hyundai Tucson: Engine Control System / Canister Close Valve (CCV) Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Control / Fuel System / Engine Control System / Canister Close Valve (CCV) Description and Operation

Description
Canister Close Valve (CCV) is normally open and is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere during EVAP leak detection process.

Fuel Pressure Control Valve Repair procedures
Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. 3. Measure resistance between the fuel ...

Canister Close Valve (CCV) Specifications
Specification ItemSpecificationCoil Resistance (x)19.8 ~ 21.8 [20°C(68°F) ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Smart Parking Assist System Speaker Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") 3. Remove the SPAS speaker (A) after disconnecting the connector and removing the nut. Installation 1. Install the SPAS speaker and crash pad lower pa ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Anchor Pretensioner Description and Operation
Description Anchor pretensioner operates as well as belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on front seat and it is an equipment to make up for the existing short stroke. Anchor pretensioner is supported by tw ...

© 2010-2019 www.htmanual.net