Hyundai Tucson: Engine Control System / Canister Close Valve (CCV) Specifications
| Specification |
| Item | Specification |
| Coil Resistance (x) | 19.8 ~ 21.8 [20°C(68°F) |
Canister Close Valve (CCV) Description and Operation
Description
Canister Close Valve (CCV) is normally open and is installed
on the canister ventilation line. It seals evaporative emission control
system by shutting the canister from the atmosph ...
Canister Close Valve (CCV) Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Knock Sensor (KS) Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Remove the intake manifold.
(Refer to Engine Mechanical System - “Intake And Exhaust System”)
3.
Disconnect the knock sensor connector (A).
4.
Remove the installation bolt (B), and then r ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Ultrasonic Sensor Repair procedures
Removal
1.
Remove the rear bumper.
(Refer to the BD group - "Rear bumper")
2.
Disconnect the sensor connector (A) inside the rear bumper.
3.
Pull out the sensor (A) by opening the sensor holder (B) out.
Installation
1.
Connect the connector, and then reassemble the sensor.
2.
I ...
