Hyundai Tucson: Engine Control System / Canister Close Valve (CCV) Schematic Diagrams

Circuit Diagram
(M/T)

(A/T)

Canister Close Valve (CCV) Specifications
Specification ItemSpecificationCoil Resistance (x)19.8 ~ 21.8 [20°C(68°F) ...

Canister Close Valve (CCV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV terminal 1 and 2. 4. Check that the resistance is within the specific ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Ultrasonic Sensor Repair procedures
Removal 1. Remove the rear bumper. (Refer to the BD group - "Rear bumper") 2. Disconnect the sensor connector (A) inside the rear bumper. 3. Pull out the sensor (A) by opening the sensor holder (B) out. Installation 1. Connect the connector, and then reassemble the sensor. 2. I ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Clutch Pedal Repair procedures
Inspection Clutch Pedal Inspection 1. Measure the clutch pedal height (from the face of the pedal pad to the floor board) and the clutch pedal clevis pin play (measured at the face of the pedal pad.) Standard value Stroke (A): 150 ± 3 mm (5.9055 ± 0.118 in.) Free play (B): 6 ~ 13 m ...

© 2010-2020 www.htmanual.net