Hyundai Tucson: Engine coolant / Changing engine coolant
Have coolant changed by an authorized HYUNDAI dealer according to the Maintenance Schedule at the beginning of this chapter.
WARNING
- Do not use engine coolant or antifreeze in the washer fluid reservoir.
- Engine coolant can severely obscure visibility when sprayed on the windshield and may cause loss of vehicle control resulting in an accident.
- Engine coolant may also cause damage to paint and body trim.
CAUTION
To prevent damage to engine parts, put a thick towel around the radiator cap before refilling the coolant to prevent the coolant from overflowing into engine parts, such as the generator.
Checking the engine coolant level
WARNING
Never remove the radiator cap or the drain plug while the engine and radiator
are hot. Hot coolant and steam may blow out under pressure, causing serious injury.
Turn the engine off a ...
Brake fluid
Checking the brake fluid level
Check the fluid level in the reservoir periodically. The fluid level should be
between MAX and MIN marks on the side of the reservoir.
Before removing the reservoi ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Engine And Transaxle Assembly Repair procedures
Removal
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
•
Mark all wiring and hoses to avoid misconnection.
•
To rele ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Clutch Master Cylinder Repair procedures
Removal
Do not spill brake fluid on the vehicle; it may damage the
paint if brake fluid does contact the paint, wash it off immediately
with water.
1.
Disconnect the push rod from the clutch pedal by removing the snap pin (A) and washer (B).
2.
Disconnect the ...