Hyundai Tucson: Warnings and indicators / Cruise SET indicator (if equipped)

The indicator light illuminates when the cruise function switch (SET- or RES+) is ON.

The cruise SET indicator light in the instrument cluster is illuminated when the cruise control switch (SETor RES+) is pushed. The cruise SET indicator light does not illuminate when the cruise control switch (CANCEL) is pushed or the system is disengaged.

Cruise indicator (if equipped)
The indicator light illuminates when the cruise control system is enabled. The cruise indicator light in the instrument cluster is illuminated when the cruise control ON-OFF button on the steerin ...

KEY OUT indicator (if equipped)
When the Engine Start/Stop button is in the ACC or ON position, if any door is open, the system checks for the smart key. If the smart key is not in the vehicle, the indicator will blink, and if ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Rear Coil Spring Repair procedures
Removal 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     Be careful not to damage to the hub bolts when removing the rear wheel and tire (A). 2. Support the rear lower arm (A) with a jack as shown i ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Pressure Sensor Description and Operation
Description The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an oil pressure. And then it presses a multiple disk clutch and transfers the generated torque into rear wheels. Its torque value varies according to a pressure status. ...

© 2010-2020 www.htmanual.net