Hyundai Tucson: Airbag Module / Curtain Airbag (CAB) Module Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Restraint / Airbag Module / Curtain Airbag (CAB) Module Description and Operation

Description

Curtain airbags are installed inside the headliner (LH and RH) and protect the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of curtain airbag by using side impact sensor (SIS) signal.

Never attempt to measure the circuit resistance of the airbag module even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Side Airbag (SAB) Module Repair procedures

Removal The side airbag cannot be disassembled from the seat back assembly, so replace assembly when replacing the side airbag. 1. Disconnect the battery negative cable a ...

Curtain Airbag (CAB) Module Components and Components Location

Components ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Input Speed Sensor Specifications
Specifications x Type: Hall effect sensor Operation condition (°C)°F((-)40~150)) -40~302Air gap (mm)in.(0.95~1.65) 0.0374~0.0649Output voltage(V)High1.18 ~ 1.68Low0.59 ~ 0.84 ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Output Speed Sensor Description and Operation
Description The Output Speed Sensor is a vital unit that measures the rate of rotation of the transmission's turbine shaft and output shaft, and delivers the readings to the TCM. The sensor provides critical input data that's used in feedback control, damper clutch control, g ...