Hyundai Tucson: Electronic Stability Control (ESC) / Indicator lights
When the ignition switch is placed to the ON position, the ESC indicator light illuminates, then goes off if the ESC system is operating normally.
The ESC indicator light blinks whenever the ESC is operating.
If ESC indicator light stays on, your vehicle may have a malfunction with the ESC system. When this warning light illuminates have your vehicle checked by an authorized HYUNDAI dealer as soon as possible.
The ESC OFF indicator light comes on when the ESC is turned off with the button.
WARNING
When the ESC is blinking, this indicates the ESC is active: Drive slowly and NEVER attempt to accelerate. NEVER press the ESC OFF button while the ESC indicator light is blinking or you may lose control of the vehicle resulting in an accident.
CAUTION
Driving with varying tire or wheel sizes may cause the ESC system to malfunction. When replacing tires, make sure they are the same size as your original tires for this vehicle.
ESC operation
ESC ON condition
When the ignition switch is in the ON position, the ESC and the ESC OFF indicator
lights illuminate for approximately three seconds and goes off, then the ESC is
turned on.
If t ...
ESC OFF usage
When driving
The ESC OFF mode should only be used briefly to help free the vehicle if stuck
in snow or mud by temporarily stopping operation of the ESC to maintain wheel torque.
To turn ESC off wh ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: Mode selection
The mode selection button controls the direction of the air flow through the
ventilation system.
Air can be directed to the floor, dashboard outlets, or windshield. Six symbols
are used to represent the direction and flow of ventilation: MAX A/C, Face, Bi-Level,
Floor, Floor- Defrost and ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Good braking practices
WARNING
Whenever leaving the vehicle or parking, always come to a complete stop and
continue to depress the brake pedal. Move the shift lever into the P (Park) position,
then apply the parking brake, and place the ignition switch in the LOCK/OFF position.
Vehicles with the parking brake not f ...
