Hyundai Tucson: SRSCM / Front Impact Sensor (FIS) Components and Components Location

Front Impact Sensor (FIS) Description and Operation

Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary p ...

Front Impact Sensor (FIS) Repair procedures

Removal     • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front impact sensor co ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Oil Pump Repair procedures
Removal and Installation 1. Remove the timing chain cover. (Refer to Timing system in this group) 2. Remove the oil pump cover (A). Tightening torque Screws : 5.9 ~ 8.8 N.m (0.6 ~ 0.9 kgf.m, 4.3 ~ 6.5 lb-ft) Bolts : 8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft) 3. Remove ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Injector Troubleshooting
Signal Waveform The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side (ground side) of the #1 injector and the bottom waveform is from the low side of ...