Hyundai Tucson: Restraint / SRSCM
- SRS Control Module (SRSCM) Description and Operation
- SRS Control Module (SRSCM) Components and Components Location
- SRS Control Module (SRSCM) Repair procedures
- Front Impact Sensor (FIS) Description and Operation
- Front Impact Sensor (FIS) Components and Components Location
- Front Impact Sensor (FIS) Repair procedures
- Side Impact Sensor (SIS) Description and Operation
- Side Impact Sensor (SIS) Components and Components Location
- Side Impact Sensor (SIS) Repair procedures
- Seat Belt Buckle Switch (BS) Description and Operation
- Seat Belt Buckle Switch (BS) Components and Components Location
- Seat Belt Buckle Switch (BS) Repair procedures
- Passive Occupant Detection System (PODS) Description and Operation
- Passive Occupant Detection System (PODS) Components and Components Location
- Passive Occupant Detection System (PODS) Repair procedures
- Schematic Diagrams
Components and Components Location
Components
1. Driver Airbag (DAB)2. Steering Wheel3. Clock Spring4. Seat Belt Pretensioner (BPT)5. Pressure Side Impact Sensor (P-SIS)6. Side Impact Sensor (SIS)7. Side Airbag (SAB)8. Passenger A ...
SRS Control Module (SRSCM) Description and Operation
Description
The primary purpose of the SRSCM (Supplemental Restraints
System Control Module) is to discriminate between an event that warrants
restraint system deployment and an event that does ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Camshaft Position Sensor (CMPS) Repair procedures
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification: Refer to “Wave Form”
Removal
•
DON’T remove the camshaft position sensor while the engine
is running or right after engine is turned off. The part and engine ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Power Door Lock Actuators Repair procedures
Inspection
Front Door Lock Actuator
1.
Remove the front door trim.
(Refer to the BD group - "Front door")
2.
Remove the front door module.
(Refer to the BD group - "Front door")
3.
Disconnect the connectors from the actuator.
4.
Check actuator operation by connecting power and gro ...
