Hyundai Tucson: SRSCM / Side Impact Sensor (SIS) Components and Components Location
| Components |
Side Impact Sensor (SIS) Description and Operation
Description
Side Impact Sensor (SIS) system consists of two P-SIS which
are installed at each center of the front door module (LH and RH) and
two SIS which are installed at each center pillar n ...
Side Impact Sensor (SIS) Repair procedures
Removal
Pressure Side Impact Sensor
•
Removal of the airbag must be performed according to the precautions/procedures described previously.
•
Before disconnect ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
Removal
1.
Remove the liftgate trim in the trunk after removing the screws and clips.
(Refer to the BD group - "Liftgate")
2.
Remove the liftgate garnish (A) after disconnecting the connector and removing the nuts.
3.
Remove the back view camera (A) after loosening the screws (2EA).
...
Hyundai Tucson (LM) 2010-2015 Service Manual: Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Specification: Refer to "Specification"
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the manif ...
