Hyundai Tucson: Engine Control System / Heated Oxygen Sensor (HO2S) Specifications

Specification
HO2S [Bank 1/Sensor 1] (Linear type)
Item
Specification
Heater Resistance (x)
2.4 ~ 4.0 [20°C(68°F)]

HO2S [Bank 1/Sensor 2] (Binary type)
A/F Ratio (x)
Output Voltage(V)
RICH
0.6 ~ 1.0
LEAN
0 ~ 0.4

Item
Specification
Heater Resistance (x)
Approx. 9.0 [20°C(68°F)]

Heated Oxygen Sensor (HO2S) Description and Operation
Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in ...

Heated Oxygen Sensor (HO2S) Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Remove the ECTS (Refer to "Removal"). 3. After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 3 and 4. 4. Check that the resistance is within the specification. Specification: ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Inhibitor Switch Description and Operation
Description Inhibiter Switch contains two contact points. One of these points connects the engine startup when the lever is in the N or P position and turns on the reverse lights. The other contact point monitors the lever's position (PRND) and is used to control gear setting signals. ...

© 2010-2020 www.htmanual.net