Hyundai Tucson: Air Conditioning System / In car sensor Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Heating, Ventilation and Air Conditioning / Air Conditioning System / In car sensor Description and Operation

Description

1.	In-car air temperature sensor is located at the center facia lower panel.

The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and according to this signal the control unit regulates incar temperature to intended value.

Evaporator Temperature Sensor Repair procedures

Inspection 1. Ignition "OFF". 2. Disconnect evaporator temperature sensor. 3. Using the multi-tester, Measure resistance between terminal "1" and "2" of evaporator temperature sensor. Spe ...

In car sensor Repair procedures

Inspection 1. Ignition "ON" 2. Blow air with changing temperature to the in car sensor air inlet. Measure sensor resistance between 1 and 2 terminals. 1. Sensor Ground2. Incar Sensor Signal ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Jack and tools
➀ Jack handle ➁ Jack ➂ Wheel lug nut wrench The jack, jack handle, and wheel lug nut wrench are stored in the luggage compartment under the luggage box cover. The jack is provided for emergency tire changing only. Remove the luggage floor support (1) by pulling it out. Turn the wing ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: AWD LOCK indicator (if equipped)
The AWD LOCK indicator light is illuminated when the AWD LOCK button is pushed. The purpose of this AWD LOCK mode is to increase the drive power when driving on wet pavement, snow-covered roads and/or off-road.The AWD LOCK indicator light is turned off by pushing the button again. CAUTION ...