Hyundai Tucson: Automatic Transaxle Control System / Line Pressure Control Solenoid Valve Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Line Pressure Control Solenoid Valve Description and Operation

Description

line pressure control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the line pressure.

26 Brake Control Solenoid Valve(26/B_VFS) Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

Line Pressure Control Solenoid Valve Specifications

Specifications Direct control VFS[LINE Pressure] x Control type : Normal high type Control Pressure kpa (kgf/cmx, psi)500.14 ~ 9.81(5.1 ~ 0.1,72.54 ~ 1.42)Current value(mA)50 ~ 850 Intern ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Rear Driveshaft Repair procedures
Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Engine Coolant Temperature Gauge
This gauge indicates the temperature of the engine coolant when the ignition switch or Engine Start/Stop button is ON. CAUTION If the gauge pointer moves beyond the normal range area toward the "H" position, it indicates overheating that may damage the engine. Do not continue driving with ...