Hyundai Tucson: Airbag Module / Passenger Airbag (PAB) Module Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Restraint / Airbag Module / Passenger Airbag (PAB) Module Description and Operation

Description

The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB.

Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Driver Airbag (DAB) Module and Clock Spring Repair procedures

Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the airbag module mounting bolts (2EA). 3. Remove the wiring fixing c ...

Passenger Airbag (PAB) Module Components and Components Location

Components ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: System operation
Ventilation 1. Set the mode to the position. 2. Set the air intake control to the outside (fresh) air position. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desired speed. Heating 1. Set the mode to the position. 2. Set the air intake control t ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Clutch Pedal Repair procedures
Inspection Clutch Pedal Inspection 1. Measure the clutch pedal height (from the face of the pedal pad to the floor board) and the clutch pedal clevis pin play (measured at the face of the pedal pad.) Standard value Stroke (A): 150 ± 3 mm (5.9055 ± 0.118 in.) Free play (B): 6 ~ 13 m ...