Hyundai Tucson: Towing / Removable towing hook
1.Open the tailgate, and remove the towing hook from the tool case.
2.Remove the hole cover pressing the lower part of the cover on the front or rear bumper.
3.Install the towing hook by turning it clockwise into the hole until it is fully secured.
4.Remove the towing hook and install the cover after use.
Towing service
If emergency towing is necessary, we recommend having it done by an authorized
HYUNDAI dealer or a commercial tow-truck service.
Proper lifting and towing procedures are necessary to prevent dama ...
Emergency towing
If towing is necessary, we recommend you have it done by an authorized HYUNDAI
dealer or a commercial tow truck service.
If towing service is not available in an emergency, your vehicle may be te ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Water pump Repair procedures
Removal and Installation
1.
Loosen the drain plug, and then drain the engine coolant. Remove the radiator cap to help drain the coolant faster.
2.
Remove the drive belt.
(Refer to Timing system in this group)
3.
Remove the water pump pulley (A).
Tightening torque:
9.8 ~ 11.8 N.m ( ...
Hyundai Tucson (LM) 2010-2015 Service Manual: A/C Pressure Transducer Repair procedures
Inspection
1.
Measure the pressure of high pressure line by measuring voltage output between NO.1 and NO.2 terminals.
2.
Inspect the voltage value whether it is sufficient to be regular value or not.
Voltage = 0.00878835 * Pressure + 0.5 [PSIA]
3.
If the measured voltage value is no ...
