Hyundai Tucson: Cruise control operation / To decrease cruise control speed
- Push the lever (1) down (to SET-) and hold it. Your vehicle will gradually slow down. Release the lever at the speed you want to maintain.
- Push the lever (1) down (to SET-) and release it immediately. The cruising speed will decrease 1.0 mph (1.6 km/h) each time the lever is operated in this manner.
- Lightly tap the brake pedal. When the vehicle attains the desired speed, push the lever (1) down (to SET-).
To increase cruise control speed
Push the lever (1) up (to RES+) and hold it, while monitoring the SET speed
on the instrument cluster. Release the lever when the desired speed is shown
and the vehicle will accelerate to ...
To temporarily accelerate with the cruise control ON
Depress the accelerator pedal.When you take your foot off the accelerator, the
vehicle will return to the previously set speed.
If you push the lever (1) down (to SET-) at the increased speed, the ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: 120,000 miles (192,000 km) or 96 months
Rotating tires
Inspect vacuum hose
Inspect air conditioning refrigerant
Inspect brake hoses and lines
Inspect drive shafts and boots
Inspect exhaust pipe and muffler
Inspect front brake disc/pads, calipers
Inspect propeller shaft (AWD)
Inspect rear brake disc/pads
Inspect steeri ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve terminals 1 and 2.
Specification: Refer to "Specification"
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
...
