Hyundai Tucson: Cruise control operation / To increase cruise control speed
- Push the lever (1) up (to RES+) and hold it, while monitoring the SET speed on the instrument cluster. Release the lever when the desired speed is shown and the vehicle will accelerate to that speed.
- Push the lever (1) up (to RES+) and release it immediately. The cruising speed will increase 1.0 mph (1.6 km/h) each time the lever is operated in this manner.
- Depress the accelerator pedal. When the vehicle attains the desired speed, push the lever (1) down (to SET-).
To set cruise control speed
1.Push the cruise ON/OFF button on the steering wheel to turn the system on.
The CRUISE indicator will illuminate.
2.Accelerate to the desired speed, which must be more than 25 mph (40 km/h).
...
To decrease cruise control speed
Push the lever (1) down (to SET-) and hold it. Your vehicle will gradually
slow down. Release the lever at the speed you want to maintain.
Push the lever (1) down (to SET-) and release it ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Body Control Module (BCM) Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center facia panel.
(Refer to BD group - "Crash pad center panel")
3.
Loosen the nut and bolt from BCM.
4.
Disconnect the connectors (A).
Installation
1.
Install the BCM and connect the connectors.
2.
In ...
Hyundai Tucson (NX4) 2022-2023 Owner's Manual: Outside temperature gauge
The outside ambient temperature
appears in the lower portion of the
cluster display. The temperature reads in
Fahrenheit or Celsius depending on the
units selected from the Settings menu in
the instrument cluster or infotainment
system.
The temperature indicated on the cluster
displ ...
