Hyundai Tucson: Brake System / Brake Line Components and Components Location
| Components |
Master Cylinder Repair procedures
Removal
1.
Turm ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the battery positive terminal and them remove the battery.
3.
Disconnect the ECM connector ...
Brake Line Repair procedures
Removal
1.
Disconnect the brake fiuid level switch connector, and remove the reservoir cap.
2.
Remove the brake fluid from the master cylinder reservior with a syringe.
...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Specifications
Specifications
ItemSpecificationPower sourceDC 14.4V (-) groundFrequency range / Channel spaceFM : 87.5 ~ 108.0 MHz / 100 KHzAM : 531 ~ 1602 KHz / 9 KHzTuning typePLL SYNTHESIZED TUNINGImpedance2 ohm x 4Antenna80 pF 75 ohmDark currentMAX 2mA (Head unit only)S/NFM : MIN 50 dBAM : MIN 40 dB
GP ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the resistance is within the specification.
Removal
Replacing an on/off soleno ...
