Hyundai Tucson: Auto Lighting Control System / Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Body Electrical System / Auto Lighting Control System / Description and Operation

Description

This function describes the following features

-	Input detection by Auto Light Sensor.

-	Generate Auto Light Out Status data.

-	Send Auto Light Out Status.

-	Tail Lamp Control by Auto light Mode.

-	Head Lamp Low Control by Auto light Mode.

-	AV Tail Control by Auto Light sensor level.

•	Auto Light Mode State Diagram is based on Auto Light Sensor's level.

•	Power condition of Auto Light Action

-	When ACC, IGN, START terminal states, Auto Light Sensor operates.

Schematic Diagrams

Circuit Diagram ...

Auto Light Switch Repair procedures

Inspection Operate the auto light switch, then check for continuity between terminals of multi-function switch connector. ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Ultrasonic Sensor Repair procedures
Removal 1. Remove the rear bumper. (Refer to the BD group - "Rear bumper") 2. Disconnect the sensor connector (A) inside the rear bumper. 3. Pull out the sensor (A) by opening the sensor holder (B) out. Installation 1. Connect the connector, and then reassemble the sensor. 2. I ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Turn by Turn
The Turn by Turn feature can be used through Blue Link®. 1. Direction Indicator Image 2. Remaining distance until next point 3. The Count bar is divided into a total of 9 levels. 4. Next Street name 5. Distance to destination 6. Expected Time Arrival 7. Current Street name ❈ For infor ...