Hyundai Tucson: Body Electrical System / Auto Lighting Control System
- Specifications
- Components and Components Location
- Schematic Diagrams
- Description and Operation
- Auto Light Switch Repair procedures
- Auto Light Sensor Repair procedures
Smart Parking Assist System Sensor Repair procedures
Removal
Front SPAS sensor
1.
Remove the front bumper.
(Refer to the BD group - "Front bumper")
2.
Pull out the SPAS sensor (A) by opening the sensor holder out.
3.
Disconnect the connect ...
Specifications
Specifications
ItemsSpecificationsRated voltage5VLoadMax. 1mADetection illuminationsTail lampON : 1.0 ± 0.10 (V)OFF : 2.3 ± 0.20 (V)Head lampON : 1.0 ± 0.10 (V)OFF : 2.3 ± 0.20 (V)
...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Passive Occupant Detection System (PODS) Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the front passenger seat assembly. (Refer to the Body group- Seat)
3.
Remove the seat cushion as an assembly. (Refer to the Body group- Seat)
Installation
1.
Inst ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Receiver-Drier Repair procedures
Replacement
1.
Remove the condenser, and then remove the bottom cap (B) with L wrench (A) from the condenser.
Tightening torque :
20 ~ 25 N.m (2.0 ~ 2.5 kgf.m, 14.5 ~ 18.2 lb-ft)
2.
Remove the desiccant (A) from condenser using a long nose plier. Check for crumbled desiccant and cl ...
