Hyundai Tucson: Transfer Assembly / Front Wheel Transfer Assembly Components and Components Location

Hyundai Tucson (LM) 2010-2015 Service Manual / 4 Wheel Drive (4WD) System / Transfer Assembly / Front Wheel Transfer Assembly Components and Components Location

Components Location

1. Transaxle Assembly
2. Transfer assembly
3. Propeller shaft
4. Coupling assembly

Transfer Fluid Repair procedures
Inspection     • Transfer oil should be inspected and refilled every 60000 km (40000 mile) / 4 year. 1. Remove the under cover (A). 2. Remove the oil filler plug (A ...

Front Wheel Transfer Assembly Repair procedures
Removal 1. Remove the following items; A. Sub frame assembly (Refer to Suspension System - "Sub Frame") B. Drive shaft assembly. (Refer to Driveshaft and axle - "Front Driveshaft ") ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Front Stabilizer Bar Repair procedures
Replacement 1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9 N.m(9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     Be careful not to damage to the hub bolts when removing the front wheel & tire. 2. Disconnect the stabilizer link (B) with the front ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Digital clock
To set the time: The ignition switch must be in the ACC position or the ON position.  With Audio off 1. Press the CLOCK button until the clock display blinks. 2. Set the clock by using the TUNE knob. WARNING Clock setting Do not adjust the clock while driving, you may lose steering c ...

© 2010-2024 www.htmanual.net