Hyundai Tucson: Lighting System / High Mounted stop lamp Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Body Electrical System / Lighting System / High Mounted stop lamp Repair procedures

Removal

High Mounted Stop Lamp

1.	Disconnect the negative (-) battery terminal.

2.	Remove the liftgate trim. (Refer to the BD group - "Liftgate")

3.	Remove the spoiler. (Refer to the BD group - "Liftgate")

4.	Remove the high mounted stop lamp assembly (A) after loosening the nuts and washer nozzle (B).

Installation

1.	Install the high mounted stop lamp and washer nozzle.

2.	Install the spoiler and liftgate trim.

License Lamps Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp lens (B) by pressing the clip (A). 3. Turn the license bulb socket (A) counterclockwise to remove the bu ...

Luggage Room Lamp Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage room lamp (B) when prying the hole (A) with a flat-up screwdriver 3. Remove the luggage room lamp bulb in cas ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Troubleshooting
Troubleshooting SymptomPossible causeRemedyOne lamp does not light(all exterior)Bulb burned outReplace bulbSocket, wiring or ground faultyRepair if necessaryHead lamps do not lightBulb burned outReplace bulbIgnition fuse (LOW:10A, HIGH:20A) blownCheck for short and replace fuseHead lamp fuse (1 ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Exhaust Manifold Repair procedures
Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal. Tightening torque: 3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft) 3. Disconnect the front oxygen sensor connector (A) and then remove it from the bracket. 4. Remove the front muf ...