Hyundai Tucson: Coupling Assembly / Oil hydraulic Motor(Actuator) Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / 4 Wheel Drive (4WD) System / Coupling Assembly / Oil hydraulic Motor(Actuator) Description and Operation

Description
The 4WD ECM controls the Pump Motor Pump (Actuator) to generating an oil pressure. The pressure engages a multiple disk clutch to transfer torque to the rear wheels. The torque to the rear wheels varies according to the pressure on the clutch.

Direct Electro Hydraulic Actuator Coupling Repair procedures
Inspection     All units are filled up with coupling fluid (ultra-low viscosity ATF) prior to shipping. Inspection, fill-up, and replacement of coupling fluid is therefore not ...

Oil hydraulic Motor(Actuator) Schematic Diagrams
Circuit Diagram ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Front Impact Sensor (FIS) Repair procedures
Removal     • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s). • Do not turn the ignition switch ON and ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Back-up Lamp Switch Repair procedures
Inspection 1. Disconnect the back up lamp switch connector (A). 2. Check the continuity between no. 1 and 2 terminals of backup lamp switch. When the shift lever is in reverse, there should be continuity. 3. If necessary, repair or replace the backup lamp switch. Replacement 1. ...

© 2010-2025 www.htmanual.net