Hyundai Tucson: Air Conditioning System / Refrigerant line Repair procedures

Replacement
1.
Discharge refrigerant from refrigeration system.
2.
Replace faulty tube or hose.
   
Cap the open fittings immediately to keep moisture or dirt out of the system.
3.
Tighten joint of bolt or nut to specified torque.
   
Connections should not be torque tighter than the specified torque.
4.
Evacuate air in refrigeration system and charge system with refrigerant.

Specified amount : 550 ± 25g (19.4 ± 0.88)

5.
Inspect for leakage of refrigerant.
Using a gas leak detector, check for leakage of refrigerant.
6.
Inspect A/C operation.
Refrigerant line Components and Components Location
Component Location ...

Compressor Components and Components Location
Components 1. Bolt2. Disc & Hub Assembly 3. Retainer Ring (Pully) 4. Pully5. Retainer Ring (Field coil)6. Field Coil7. Compressor Assembly ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Manual Transaxle Components and Components Location
Components 1. Clutch housing2. Back-up lamp switch3. Control shaft complete 4. Manual transaxle case ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Alternator Specifications
Specification Alternator ItemSpecificationRated voltage13.5V, 120ASpeed in use 1,000 ~ 18,000 rpmVoltage regulatorIC Regulator built-in typeRegulator Setting VoltageExternal mode Refer to below graphInternal mode14.55 ± 0.3V Temperature GradientExternal mode0 ± 3 mV / °CInternal mode-3.5 ± ...

© 2010-2020 www.htmanual.net