| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad") |
| 3. |
Remove the SPAS speaker (A) after disconnecting the connector and removing the nut.
|
| Installation |
| 1. |
Install the SPAS speaker and crash pad lower panel. |
Smart Parking Assist System Sensor Components and Components LocationHyundai Tucson (LM) 2010-2015 Service Manual: Intake Actuator Description and Operation
Description
1.
The intake actuator is located at the blower unit.
2.
It regulates the intake door by signal from control unit.
3.
Pressing the intake selection switch will shift between recirculation and fresh air modes.
...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Erasing HomeLink® buttons
Individual buttons cannot be erased. However, to erase all three programmed buttons:
1. Press and hold the two outer HomeLink® buttons until the indicator light begins
to flash-after 20 seconds.
2. Release both buttons. Do not hold for longer than 30 seconds.
The Integrated HomeLink® Wireless ...