Hyundai Tucson: Body Electrical System / Smart Parking Assist System (SPAS)
- Specifications
- Components and Components Location
- Schematic Diagrams
- Description and Operation
- Smart Parking Assist System Unit Components and Components Location
- Smart Parking Assist System Unit Repair procedures
- Smart Parking Assist System Speaker Components and Components Location
- Smart Parking Assist System Speaker Repair procedures
- Smart Parking Assist System Sensor Components and Components Location
- Smart Parking Assist System Sensor Repair procedures
Troubleshooting
Troubleshooting
SymptomPossible causeRemedyOne lamp does not light(all exterior)Bulb burned outReplace bulbSocket, wiring or ground faultyRepair if necessaryHead lamps do not lightBulb burned out ...
Specifications
Specifications
SPAS unitPowerIGN 1Operating voltage9V ~ 16VSPAS sensor (Front/Rear)Number of sensors4EA (Front), 4EA (Rear)Operation voltage 9V ~ 16VSupply current 0.5mA ~ 5mAOperation ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Master Cylinder Repair procedures
Removal
1.
Turm ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the battery positive terminal and them remove the battery.
3.
Disconnect the ECM connector and the ECM and battery tray.
4.
Disconnect the brake fluid level switch connector (A), and remo ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Rail Pressure Sensor (RPS) Description and Operation
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe
and measures the instantaneous fuel pressure in the delivery pipe. The
sensing element (Semiconductor element) built in the sensor converts the
pressure to voltage signal. By using this signal, the ECM can control
co ...