| Special Service Tools |
| Tool (Number and name) | Illustration | Use |
| 09977-29000 Disc & hub assembly bolt remover |
| Removal and installation of disc & hub assembly. |
TroubleshootingHyundai Tucson (LM) 2010-2015 Service Manual: Line Pressure Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve sensor connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the resistance is within the specification.
Removal
Replacing an on/off ...
Hyundai Tucson (LM) 2010-2015 Service Manual: ICM (Integrated Circuit Module) Relay Box Repair procedures
Inspection
Rear Wiper Relay
Check for continuity between the terminals.
1.
There should be continuity between the No.11 in the A and
No.12 in the A terminals when power and ground are connected to the No.2
in the A and No.11 in the A terminals.
2.
There should be no continuity between ...