Hyundai Tucson: SRSCM / Front Impact Sensor (FIS) Components and Components Location

Front Impact Sensor (FIS) Description and Operation

Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary p ...

Front Impact Sensor (FIS) Repair procedures

Removal     • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front impact sensor co ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Pressure Sensor Repair procedures
Inspection     If you have trouble code related to the pressure sensor check pressure sensor according to the inspection process. Pressure Sensor Inspection Procedure Measure the resistance of pressure sensor 1. Turn ignition switch OFF. 2. Disconnect the pressure ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Valve Body Repair procedures
Removal 1. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") 2. Remove the battery and the battery tray. (Refer to Engine Electrical System - "Battery") 3. Remove the under cover (A). Tightening torque : 19.6 ~ 24.5 N.m (2.0 ~ 2.5 kgf.m, 14.5 ~ 18.1 lb-ft) ...