Hyundai Tucson: Heating and air conditioning / To turn off the blowers
Setting the mode selection knob to the “0” position turns off the fan.
Fan speed control
The ignition switch must be in the ON position for fan operation.
The fan speed control knob allows you to control the fan speed of the air flowing
from the ventilation system.
To change the f ...
Air conditioning
Push the A/C button to turn the air conditioning system on (indicator light will
illuminate). Push the button again to turn the air conditioning system off. ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: BJ Boot Repair procedures
Removal
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refer to Driveshaft Assembly - “TJ Joint”)
3.
Remove the Dynamic damper.
(Refer to Driveshaft Assembly - “Dynamic Damper”)
4.
Using a plier ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: AWD LOCK indicator (if equipped)
The AWD LOCK indicator light is illuminated when the AWD LOCK button is pushed.
The purpose of this AWD LOCK mode is to increase the drive power when driving on
wet pavement, snow-covered roads and/or off-road.The AWD LOCK indicator light is
turned off by pushing the button again.
CAUTION
...
