Hyundai Tucson: Seat Belt Pretensioner / Anchor Pretensioner Components and Components Location
| Components |
Anchor Pretensioner Description and Operation
Description
Anchor pretensioner operates as well as belt Pretensioner at
the same time If it gets into its deploy condition after a collision. It
is located at near anchor on front seat and it ...
Anchor Pretensioner Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
To remove the seat belt anchor pretensioner (C), keep on
pushing the lock pin ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Knock Sensor (KS) Description and Operation
Description
Knocking is a phenomenon characterized by undesirable
vibration and noise and can cause engine damage. Knock Sensor (KS) is
installed on the cylinder block and senses engine knocking.
When knocking occurs, the vibration from the cylinder block
is applied as pressure to the piez ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Heater & A/C Control Unit(Manual) Components and Components Location
Components
Connector Pin Function
ConnectorPin NoFunctionConnectorPin NOFunctionConnector(A)1Middle HighConnector(B)1Tail Lamp (ILL+)2-2Battery 3GND3Mode Actuator (VENT)4High4Mode Actuator (DEF)5Middle Low5Temp Actuator (COOL)6Low6Temp Actuator (WARM)x7Intake Actuator (FRE)8Intake Actuator (REC) ...
