Hyundai Tucson: Heating, Ventilation and Air Conditioning / Blower
- Blower Unit Components and Components Location
- Blower Unit Repair procedures
- Blower Motor Repair procedures
- Power Mosfet Repair procedures
- Climate Control Air Filtar Description and Operation
- Climate Control Air Filtar Repair procedures
- Intake Actuator Components and Components Location
- Intake Actuator Description and Operation
- Intake Actuator Repair procedures
Mode Control Actuator Repair procedures
Inspection
1.
Ignition "OFF”
2.
Disconnect the connector of mode control actuator.
3.
Verify that the mode control actuator operates to the defrost
mode when connecting 12V to the term ...
Blower Unit Components and Components Location
Component Location
Components
1. Intake Case (LH)2. Intake Case (RH)3. Blower motor4. Intake door5. Intake actuator6. Mosfet [Auto type]7. Resistor [Manual type]8. Climate control air filter cov ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Front Washer Motor Repair procedures
Inspection
Front Washer Motor
1.
With the washer motor connected to the reservoir tank, fill the reservoir tank with water.
Before filling the reservoir tank with water, check the
filter for foreign material or contamination. if necessary, clean the
filter.
2.
C ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Temperature Control Actuator Description and Operation
Description
1.
Heater unit includes mode control actuator and temperature control actuator.
2.
Temperature control actuator is located at the heater unit.
It regulates the temperature by the procedure as follows. Signal from
control unit adjusts position of temperature door by operating ...
