Hyundai Tucson: Blower / Intake Actuator Components and Components Location

Component Location

Climate Control Air Filtar Repair procedures
Replacement 1. Disconnect the damper (A) from the glove box (B). 2. Remove the glove box lift (C). 3. Remove the filter cover (A) with pushing the knob. 4. Replace the air filter (B) ...

Intake Actuator Description and Operation
Description 1. The intake actuator is located at the blower unit. 2. It regulates the intake door by signal from control unit. 3. Pressing the intake selection switch will shift between re ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Schematic Diagrams
Schematic Diagram Canister The Canister is filled with charcoal and absorbs evaporated fuel vapor from the fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PCM when appropriate conditions are set. Purge Control Solenoid Valve (PCSV) The Purge ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Coolant Repair procedures
Refilling And Bleeding     Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the radiator.     When pouring engine coolant, be sure to shut the relay box lid and not to ...

© 2010-2025 www.htmanual.net