Hyundai Tucson: Engine Electrical System / Charging System
- Description and Operation
- Repair procedures
- Alternator Description and Operation
- Alternator Specifications
- Alternator Components and Components Location
- Alternator Schematic Diagrams
- Alternator Repair procedures
- Battery Description and Operation
- Battery Specifications
- Battery Components and Components Location
- Battery Repair procedures
- Battery Troubleshooting
- Battery Sensor Description and Operation
- Battery Sensor Repair procedures
Spark Plug Repair procedures
Inspection
[On vehicle inspection]
1.
Accelerate the engine to about 3,000 rpm 3 times or more.
2.
Remove the spark plug.
3.
Check the spark plug visually.
If the electrode is dry, the ...
Description and Operation
Description
The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: PDM Relay Box Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front seat heater switch.
(Refer to BE group - "Seat heater switch")
3.
Remove the PDM relay box (A) after loosening the screws (2EA) and desconnecting the connector.
IG2 Relay
Check for continuity between th ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Oil Pressure Switch Repair procedures
Inspection
1.
Check the continuity between the terminal and the body with an ohmmeter.
If there is no continuity, replace the oil pressure switch.
2.
Check the continuity between the terminal and the body when
the fine wire is pushed. If there is continuity even when the fine wire
is pu ...
