Hyundai Tucson: Starting System / Starter Specifications
| Specification |
| Item | Specification | |
| Rated voltage | 12 V, 1.2 kW | |
| The number of pinion teeth | 13 | |
| Performance [No-load, 11 V] | Ampere | Max. 70 A |
| Speed | Min. 2,400 rpm | |
Starter Description and Operation
Description
The starting system includes the battery, starter, solenoid
switch, ignition switch, inhibitor switch (A/T), clutch pedal switch
(M/T), ignition lock switch, connection wires and th ...
Starter Components and Components Location
Components
1. Front bracket assembly2. Magnet switch assembly3. Lever4. Reducer assembly5. Lever stop6. Gasket sheet7. Yoke assembly8. Armature assembly9. Brush holder assembly
...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Anchor Pretensioner Description and Operation
Description
Anchor pretensioner operates as well as belt Pretensioner at
the same time If it gets into its deploy condition after a collision. It
is located at near anchor on front seat and it is an equipment to make
up for the existing short stroke. Anchor pretensioner is supported by
tw ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Control Shaft Assembly Repair procedures
Removal
1.
Remove the following items;
A.
Air cleaner assembly and air duct.
(Refer to "Intake and Exhaust system" in EM group.)
B.
Battery and battery tray.
(Refer to "Charging system" in EE group.)
Set room side Shift lever to N position before remove the cont ...
