Hyundai Tucson: Engine Electrical System / Starting System

Battery Sensor Repair procedures

Removal 1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A). 3. Remove the battery negative (-) cable after removing the bolt (B). Installation ...

Description and Operation

Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and th ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Rear seats
Seatback angle To recline the seatback: 1. Pull up the seatback lever. 2. Hold the lever and adjust the seatback to the position you desire. 3. Release the lever and make sure the seatback is locked in place. (The lever MUST return to its original position for the seatback to lock.) Foldin ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left on the tire. Replace the tire when this happens. Do not wait for the band to appear across the entire tread before replacing the ti ...