Hyundai Tucson: Why didn’t My Airbag Go Off In a Collision? / Airbag non-inflation conditions

In certain low-speed collisions, the airbags may not deploy. The airbags are designed not to deploy in such cases because they may not provide benefits beyond the protection of the seat belts.

Front airbags are not designed to inflate in rear collisions, because occupants are moved backward by the force of the impact.

Front airbags may not inflate in side impact collisions, because occupants move in the direction of the collision.

Side and curtain airbags may inflate depending on the severity of impact.

In an angled collision, the force of impact may direct the occupants in a direction where the airbags would not be able to provide any additional benefit, and thus the sensors may not deploy any airbags.

Just before impact, drivers often brake heavily. Such heavy braking lowers the front portion of the vehicle causing it to "nosedive". This is particularly important when the vehicle in front has a higher ground clearance. Airbags may not inflate if your vehicle is in a "nosedive" condition because the collision forces detected by the sensors may have been significantly reduced.

Front airbags may not inflate in rollover accidents because front airbag deployment would not provide additional occupant protection.

The side and curtain airbags may inflate in a rollover situation, when detected by the rollover sensor.

Airbags may not inflate if the vehicle collides with objects such as utility poles or trees, where the point of impact is concentrated and the collision energy is absorbed by the vehicle structure.

Airbag inflation conditions
Front airbags Airbag inflation conditions Front airbags are designed to inflate in a frontal collision depending on the severity of impact. Side and curtain airbags Side and curtain airb ...

SRS Care
The SRS is virtually maintenance-free and there are no parts you can safely service by yourself. If the SRS airbag warning light does not illuminate when the ignition switch is in the ON posit ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Alternator Schematic Diagrams
Circuit Diagram     • COM signal - When controlling the voltage generated, the ECM sends the target voltage data to the alternator via a PWM signal.(High voltage: 4V or higher, low voltage: 2V or lower) • FR signal - The transistor activation signal inside t ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Console Components and Components Location
Components [A/T] 1. Floor console2. Console upper cover (AT)3. Floor console tray4. Floor console bezel5. Extension side cover ...

© 2010-2023 www.htmanual.net