Hyundai Tucson: Engine Mechanical System
Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Mechanical System
- General Information
- Engine And Transaxle Assembly
- Timing System
- Cylinder Head Assembly
- Camshaft Repair procedures
- Cylinder Head Components and Components Location
- Cylinder Head Repair procedures
- Cylinder Block
- Cooling System
- Coolant Repair procedures
- Radiator Components and Components Location
- Radiator Repair procedures
- Water pump Components and Components Location
- Water pump Repair procedures
- Water pump Troubleshooting
- Thermostat Repair procedures
- Thermostat Troubleshooting
- Water Temperature Control Assembly Repair procedures
- Lubrication System
- Engine Oil Repair procedures
- Engine Oil Flow Diagram
- Oil Pump Components and Components Location
- Oil Pump Repair procedures
- Oil Pan Repair procedures
- Oil Pressure Switch Repair procedures
- Oil level sensor Repair procedures
- Intake And Exhaust System
General Information
Identification Number Locations
Identification Number Description
Vehicle Identification Number
1.
World Manufacturer Identifier (WMI)
A.
KMF : Commercial vehicle (Van)
B.
KMH : Passenger ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Transfer Fluid Repair procedures
Inspection
•
Transfer oil should be inspected and refilled every 60000 km (40000 mile) / 4 year.
1.
Remove the under cover (A).
2.
Remove the oil filler plug (A).
3.
Check the oil level.
Oil level must be up to fill the hole, if not, ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Knock Sensor (KS) Description and Operation
Description
Knocking is a phenomenon characterized by undesirable
vibration and noise and can cause engine damage. Knock Sensor (KS) is
installed on the cylinder block and senses engine knocking.
When knocking occurs, the vibration from the cylinder block
is applied as pressure to the piez ...
© 2010-2019 www.htmanual.net