Hyundai Tucson: Engine Mechanical System / Lubrication System

Water Temperature Control Assembly Repair procedures

Removal and Installation 1. Drain engine coolant so its level is below water temperature control assembly. 2. Remove the air cleaner assembly. (Refer to Engine transaxle assembly in this grou ...

Engine Oil Repair procedures

Oil And Filter Replacement     • Prolonged and repeated contact with mineral oil will result in the removal of natural fats from the skin, leading to dryness, irritation ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Camshaft Repair procedures
Removal Timing chain cover removal is not required for this procedure.     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion.     • Mar ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Wheel Repair procedures
Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque (Front) : 88.25 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) Tightening torque (Rear) : 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     When using an impact gun, final tighten ...