Hyundai Tucson: Engine Mechanical System / Cooling System
- Coolant Repair procedures
- Radiator Components and Components Location
- Radiator Repair procedures
- Water pump Components and Components Location
- Water pump Repair procedures
- Water pump Troubleshooting
- Thermostat Repair procedures
- Thermostat Troubleshooting
- Water Temperature Control Assembly Repair procedures
Cylinder Block Repair procedures
Disassembly
Engine removal is required for this procedure.
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damaging the cylinder head, wait u ...
Coolant Repair procedures
Refilling And Bleeding
Never remove the radiator cap when the engine is hot. Serious
scalding could be caused by hot fluid under high pressure escaping from
the radiator.
...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Passenger Airbag (PAB) Module Description and Operation
Description
The passenger airbag (PAB) is installed inside the crash pad
and protects the front passenger in the event of a frontal crash. The
SRSCM determines if and when to deploy the PAB.
Never attempt to measure the circuit resistance of the airbag
module (squib) ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Crankshaft Position Sensor (CKPS) Troubleshooting
Signal waveform
This example shows a typical Crankshaft Position Sensor(CkPS)
and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls
the injection and ignition timing by using these signals.
Generally CkPS signal is used to detect the piston's position
and CMPS signal is use ...
