Blind-Spot Safety
With the ignition switch ON, go to User Settings > Driver Assistance > Blind- Spot Safety (for cluster type) or Setup > Vehicle > Driver Assistance > Blind-Spot Safety (for infotainment system type) from the Settings menu to select the following:
If you change the setting from Off to Active Assist or Warning Only, the warning lights on the side view mirrors blink for three seconds.
In addition, if the engine is turned on when the function is set to Active Assist or Warning Only, the warning lights on the side view mirrors blink for three seconds.
When the engine is restarted with the function off, the "Blind-Spot Safety is Off" may appear on the instrument cluster.
WARNING
If Warning Only or Off is selected, the function does NOT brake your vehicle to help avoid a collision.
Information
When the engine is restarted, Blind-Spot Collision-Avoidance Assist maintains its last setting.
Information
You can change the Warning Timing and Warning Volume settings or select Driving Safety Priority for Blind-Spot Collision-Avoidance Assist from the Settings menu. For more information, refer to the "Driver Assistance System Settings" section in this chapter.
Hyundai Tucson (LM) 2010-2015 Service Manual: TJ Joint Components and Components Location
Components
[LH]
1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Shaft6. TJ boot band7. TJ boot8. Spider assembly9. Retainer ring10. TJ housing11. Housing circlip
[RH]
1. BJ assembly2. BJ circlip3. BJ boot band4. BJ boot5. Dynamic damper band6. Dynamic damper7. Shaft8. TJ b ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS Pro to check for
DTCs. Refer to the Diagnostic Trouble Code list for repairing of the
related DTCs.
When the front airbag(s) deployed after a collision, replace the following items.
- ...